Height(mm): 1200,1600,1800,2000,2200,ect.
Width(mm): 1000,900,800,750,600,450,ect.
Length(mm): 1000,900,800,750,600,450,300 ect.
The product has multiple types of specification and dimension, we can also produce based on customer's requirement, the product has multiple types of structure,specification, dimension, and capacity. The surface is static molded, with graceful shape. The box/cabinets can installing power switch, breaker, voltage/ammeter, instructions light, ect.Combination illuminating distribution box is suitable for distributing control of modern bulidings, such as large stories buildings, guesthouse, passenger transport station. Used in AC 50-60Hz, below 415V, illuminating and mini power controllingircuit as over current, overload and shout circuit protection and frequency switch under the rated working state. They have 2 ways, 4 ways, 6 ways, 12 ways, 18 ways, 24 ways, 36 ways and 72 ways.

Suitable for indoor use, these distribution boxes have a maximum rated current of 100A / 630A.
The module meets the IEC 60439 standard, and adds clamping time to ensure reliable contact.
With the shell of the branch box made of galvanized sheet, aluminum alloy and glass reinforced plastic, the plastic - sprayed surface has a stylish appearance.
The Shell and Bracket of it is made from 1.00mm high quality galvanized Steel Sheet,spraying with Smooth Powder Paint, mixed with ABS plastic rim and transparent
cover, which using for monitoring the Elec. components in the Box. There are holes in the upside and downside, you can install the electric line flexibly, the protective category reach to IP20.Normally, The Bottom of the Distribution Board use a Connecting Bank for co-connecting, and all the Connecting Bank would be provided by us, what we need customer to provide is the Electrical System Diagram.

TSP(R) Series Lighting Distribution Box fully conforms to IEC-493-1 criterion, Good-Looking, Endurable and safe, it is widely used as a power Distribution System
for Factory, Mansion, Residential House, Emporium, etc.
TSP(R) Series Lighting Distribution Box Can install MG, ABB, Siemens, or other MCBs.
The Unique Connecting Methods between The Din Rail and the Box, so the Din Rail and CBs can rotate at the same time.
The Construct Structure of the Box perfectly saved the Spaces inside the box and fully saved the costs as well.
TSP(R) Series Lighting Distribution Box always use for the control, load, Leak and
short-way protection of Power, Lighting or Motor, which is not over than 50-60Hz,
600V, Loading Currency not over than 100A, Single or Three Phase.
For the sake of fully protection., there are Neutral and Earthing Rails Inside of the Box!
The box can mount and arrange 7 Way, 10 Way, 12 Way, 16 Way, 20 Way Breakers, each single pole for 1 Way; Double Pole Leakage Breakers for Two Way, and 4 Pole Leakage Breakers for 4 Way.
Using Condition:
1. General Temperature: Not over than +40°C, Not less than -20°C.
2. Altitude height not over than 2500M
3. Relative Humidity: Not over than 90%.
4. Without dust, fire, Corrosion or other dangerous items around