The universal terminal box provides terminals for 12 sensors. Each terminal allows connection of up to 10 conductors, so it can accomodate almost any type of sensor. Sensor cables enter the box via conduit hubs. All wiring is done from the front of the box using spring-loaded terminals. A readout is connected to the terminal box via a jumper cable, and a rotary switch provides access to each of the sensors. Jumper cables for vibrating wire sensors are available with VW readouts. Jumpers for other types of sensors may be special-ordered to match the wiring of the sensor.The lockable, weatherproof fiberglass box measures 290 mm high x 345 mm wide x 135 mm deep (11.5 x 13.5 x 5.25").

The small VW terminal box provides terminals for 6 vibrating wire sensors. Each terminal allows connection of 5 conductors: the two VW wires, the two thermistor wires, and the shield wire. Sensor cables enter the box via a conduit hub. All wiring is done from the front of the box using screw terminals. A readout is connected to the terminal box via a jumper cable, and a rotary switch provides access to each sensor. Jumpers are available with VW readouts.The lockable, weatherproof fiberglass box measures 240 mm high x 190 mm wide x 127 mm deep (9.5 x 7.5 x 5").The large VW terminal box provides terminals for 24 vibrating wire sensors. Two rotary switches provides access to the sensors. weatherproof fiberglass box measures 290 mm high x 345 mm wide x 135 mm deep. (11.5 x 13.5 x 5.25").

The GP04C fiber optic terminal box consists of a Al-alloy casing with a front panel for 12 to 48 connectors, a wall mounting kit and one optical cable attachment system. It is fully compatible with tight structure and single fiber tube cables and allows for storage of extra lengths of fibers.
Features
a).Suitable for communication systems, digital image systems and CATV, etc.
b).More economic for small capacity subscribers (such as small base stations).
c).Allowing for optical fiber splicing, storage and adjustment.
d).Wall mountable and easy to install.
e).Reliable devices for cable securing, stripping and grounding.
f).Distribution Unit features 6-adapter model cards inserting on the patch boards. Vertical insertion models and oblique insertion models are available.
g).In the splice trays, fiber retention radium>40mm.
h).The box body is made of Aluminum alloy spayed with plastic, which provides good appearance and light structure.
i).The lock on the rack provides reliable security.